Ruud Air Handlers in Myrtle Beach

Conway, Georgetown County, Pawleys Island and the Grand Strand Region

Select a Model to Learn More:

Hydronic Air Handler – Powered by Tankless Technology (RWMV)

Hydronic Air Handler

• Low profile 34-inch design is lighter, easier to handle and leaves room for optional accessories
• Left or right side electric connections
• Integrated control board features diagnostics, manages all operational functions and provides hookups for humidifier and electronic air cleaner
• An insulated blower compartment makes it one of the quietest hydronic air handlers on the market today
• Pre-paint galvanized steel cabinet
• Molded permanent filter(s)
• Transformer and control fuse protection
• Solid bottom is standard
• A variety of cooling coils and plenums designed to use with the Hydronic Air Handler are available as optional accessories for air conditioning models
• Stainless steel water pump
• Field covertiable for vertical downflow, horizontal left hand, or right hand air supply
• Energy efficient ECM motor which slowly ramps up speed for quiet and finely tuned operation to maintain constant CFM
• Factory installed indoor coil
• Pump control knob allows adjustment of the differential between the inlet water temperature and outlet air temperature.

Tankless Water Heater

• Industry best! Minimum flow rate of .26 GPM, minimum activation flow rate of .40 GPM
• ENERGY STAR^® rated models available
• Next generation burner technology
• UMC-117 remote control and 10 ft. of thermostat wire is included
• EZ-Link™ cable available for high demand applications to connect two tankless units to operate as one
• High-altitude capability – up to 8,400 ft. elevation above sea level (no chip required)
• Intelligent electronic controls designed to increase energy efficiency and safety
• Self Diagnostic System
• Rheem Exclusive! Built-in Condensate Neutralizer for safe disposal of condensate.
• Rheem Exclusive! Overheat Film Wrap Safetly shuts down the heater at unsafe temperatures.
• All models are compatible with 1/2″ gas line.
• Condensing models vent with PVC for easier installations.

EcoNet™ Enabled High Efficiency Modulating with CFM Motor (RHMV)

• The RHMV is EcoNet Enabled: This allows the RHMV to directly communicate with the EcoNet Smart Home System.
• The RHMV features an Electronic Expansion Valve (EEV)
• Features a constant CFM variable speed motor (ECM) which provides enhanced SEER performance. The RHMV is rated with UA17, UA20 air conditioners and UP17, UP20 heat pumps.
• Evaporator is constructed of aluminum fins bonded to internally grooved aluminum tubing.
• Versatile 4-way convertible design for upflow, downflow, horizontal left and horizontal right applications.
• Factory-installed indoor coil.
• Sturdy cabinet construction with 1.0 inch [25.4 mm] of foil faced insulation for excellent sound and insulating characteristics.
• Field-installed auxiliary electric heater kits provide exact heat for indoor comfort. Kits include circuit breakers which meet U.L. and cUL requirements for service disconnect.
• 11/2 ton [5.3 kW] through 5 ton [17.6 kW] models are between 421/2 to 57 inches [1080 to 1448 mm] tall and 22 inches [559 mm] deep.
• All models meet or exceed 330 to 400 CFM [156 to 189 L/s] per ton at .3 inches [.7 kPa] of external static pressure.
• Enhanced airflow up to .7″ external static pressure.
• Suitable for application in mobile homes.

High Efficiency – Two-Stage ECM Motor (RH2T)

• The RH2T is EcoNet Enabled (EEV Option): This allows the RH2T to directly communicate with the EcoNet Smart Home System.
• Feature an Electronic Expansion Valve (EEV)
• The RH2T features a Constant Torque Two-stage motor (ECM) which provides enhanced SEER performance with most Ruud outdoor units.
• Evaporator is constructed of aluminum fins bonded to internally grooved aluminum tubing.
• Versatile 4-way convertible design for upflow, downflow, horizontal left and horizontal right applications.
• Factory-installed indoor coil.
• Sturdy cabinet construction with 1.0 inch [25.4 mm] of foil faced insulation for excellent sound and insulating characteristics.
• Field-installed auxiliary electric heater kits provide exact heat for indoor comfort. Kits include circuit breakers which meet U.L. and cUL requirements for service disconnect.
• 1½ ton [5.3 kW] through 5 ton [17.6 kW] models are between 42½ to 57 inches [1080 to 1448 mm] tall and 22 inches [559 mm] deep.
• All models meet or exceed 330 to 400 CFM [156 to 189 L/s] per ton at .3 inches [.7 kPa] of external static pressure.
• Enhanced airflow up to .7″ external static pressure.
• Suitable for application in mobile homes.

High Efficiency – ECM Motor (RH2V)

• Includes an energy efficient ECM^® Motor, which in most applications, enhances the SEER rating of the outdoor unit. It also slowly ramps its speed up for quiet operation and enhanced customer satisfaction.
• Versatile 4-way convertible design for upflow, downflow, horizontal left and horizontal right applications.
• Nominal airflow up to 1.0″ external static pressure.
• Factory-installed indoor coil.
• Sturdy cabinet construction with 1.0 inch [25.4 mm] of foil faced insulation for excellent sound and insulating characteristics.
• Field-installed auxiliary electric heater kits provide exact heat for indoor comfort. Kits include circuit breakers which meet U.L. and cUL requirements for service disconnect.
• Dip switch settings for selectable, customized cooling airflow over a wide variety of applications.
• On-demand dehumidification terminal that adjusts airflow to help control humidity for unsurpassed comfort in cooling mode.
• External filter required.
• Evaporator coil is constructed of aluminum fins bonded to internally grooved aluminum tubing.

High Efficiency – ECM Motor (RH1V)

• Includes an energy efficient ECM^® Motor, which in most applications, enhances the SEER rating of the outdoor unit. It also slowly ramps its speed up for quiet operation and enhanced customer satisfaction.
• Versatile 4-way convertible design for upflow, downflow, horizontal left and horizontal right applications.
• Nominal airflow up to 1.0″ external static pressure.
• Factory-installed indoor coil.
• Sturdy cabinet construction with 1.0 inch [25.4 mm] of foil faced insulation for excellent sound and insulating characteristics.
• Field-installed auxiliary electric heater kits provide exact heat for indoor comfort. Kits include circuit breakers which meet U.L. and cUL requirements for service disconnect.
• Dip switch settings for selectable, customized cooling airflow over a wide variety of applications.
• On-demand dehumidification terminal that adjusts airflow to help control humidity for unsurpassed comfort in cooling mode.
• External filter required.
• Evaporator coil is constructed of aluminum fins bonded to internally grooved aluminum tubing.

High Efficiency Constant Torque (ECM) Motor (RH1T)

• RH1T feature a Constant Torque motor (ECM) which provides enhanced SEER performance with most Ruud outdoor units.
• Versatile 4-way convertible design for upflow, downflow, horizontal left and horizontal right applications.
• Factory-installed indoor coil. • Sturdy cabinet construction with 1.0 inch [25.4 mm] of foil faced insulation for excellent sound and insulating characteristics.
• Field-installed auxiliary electric heater kits provide exact heat for indoor comfort. Kits include circuit breakers which meet U.L. and cUL requirements for service disconnect.
• 11/2 ton [5.3 kW] through 5 ton [17.6 kW] models are between 421/2 to 551/2 inches [1080 to 1410 mm] tall and 22 inches [559 mm] deep.
• All models meet or exceed 330 to 400 CFM [156 to 189 L/s] per ton at .3 inches [.7 kPa] of external static pressure.
• Enhanced airflow up to .7″ external static pressure.
• Evaporator is constructed of aluminum fins bonded to internally grooved aluminum tubing

Front or Bottom Return – with ECM Motor (RF1T)

• Front or Bottom Return
• Flow Check Piston for cooling or heat pump operation
• Wall-hanging brackets
• Built in Filter Rack
• AHRI Certified
• UL Certified
• Molex Plug Connections for field installed heater kits
• Dual Voltage Direct Drive Blower with multi-speed motor
• Thermoplastic Drain Pan with bottom primary and secondary connections
• Optional Decorative Grill for front return applications
• Optional Factory Installed Condensate Float Switch which shuts off the outdoor unit in event the condensate pan becomes clogged

Front or Bottom Return – with PSC Motor (RF1P)

• Front or Bottom Return
• Flow Check Piston for cooling or heat pump operation
• Wall-hanging brackets
• Built in Filter Rack
• AHRI Certified
• UL Certified
• Molex Plug Connections for field installed heater kits
• Dual Voltage Direct Drive Blower with multi-speed motor
• Thermoplastic Drain Pan with bottom primary and secondary connections
• Optional Decorative Grill for front return applications
• Optional Factory Installed Condensate Float Switch which shuts off the outdoor unit in event the condensate pan becomes clogged